5 PACK of Selleys Adhesive Fix & Go Supa Glue 3ml
Not Found
$161.02
Product Details
Fix n Go.
Supa Glue.
Dries colourless. Sets within 10 seconds (maximum bond strength in 12 hours). No mixing - no clamps - heat and water resistant. One drop holds a tonne (provided the bonded surface area exceeds 650mm2 and there is no gap between the surface. Tests under laboratory conditions give tensile strengths greater than 1 tonne). Supa Glue bonds most non-porous materials. It is not recommended for use on paper or leather, nor on polyethylene or Teflon. Supa Glue will not permanently bond glass or materials containing alkaline elements. For safety, Supa Glue is not recommended for repairing handles of vessels which contains hot liquids. The uncured product is classified as hazardous, it contains ehtyl-2-cyanoacrylate.
Directions
Directions:
1. Carefully pierce seal at end of metal tube with reverse end of cap. Replace plastic nozzle. Surfaces to be bonded should fit exactly. Surfaces to be joined should be clean, dry and free from dust, dirt and grease.
2. Apply a drop of Supa Glue to only one of the surfaces to be bonded. Use sparingly. Do not spread. One drop covers an area of 25mm x 25mm.
3. Quickly align both surfaces. Keep fingers away from any excess adhesive so they will not get stuck. Apply slight pressure to ensure effective spreading and bonding.
4. Allow several minutes to provide sufficient bond strength for practical use. Maximum strength is reached after 12 hours. Wipe tip of tube with a cloth or paper and replace the cap.
1. Carefully pierce seal at end of metal tube with reverse end of cap. Replace plastic nozzle. Surfaces to be bonded should fit exactly. Surfaces to be joined should be clean, dry and free from dust, dirt and grease.
2. Apply a drop of Supa Glue to only one of the surfaces to be bonded. Use sparingly. Do not spread. One drop covers an area of 25mm x 25mm.
3. Quickly align both surfaces. Keep fingers away from any excess adhesive so they will not get stuck. Apply slight pressure to ensure effective spreading and bonding.
4. Allow several minutes to provide sufficient bond strength for practical use. Maximum strength is reached after 12 hours. Wipe tip of tube with a cloth or paper and replace the cap.
We provide general product information such as nutritional information, country of origin and product packaging for your convenience. This information is intended as a guide only, including because products change from time to time. Please read product labels before consuming. For health goods, always read the label and follow the directions for use on pack. If you require specific information to assist with your purchasing decision, we recommend that you contact the manufacturer via the contact details on the packaging.
